Local Call 1300 305 579 Email peter@psifilters.com.au This e-mail address is being protected from spambots, you need JavaScript enabled to view it open 9am to 5.30pm mon-fri

 

.

TDS METER 3 (with carrying case)  
TDS 3 Meter   FEATURES
bullet Ideal for commercial use. Includes a carrying case with belt clip.
bullet Highly efficient and accurate due to its advanced microprocessor technology.
bullet Hold Function: saves measurements for convenient reading and recording.
bullet Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries.
bullet Measurement Range: 0-9990ppm. From 0-999ppm, the resolution is in increments of 1ppm. From 1,000 to 9,990ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image.
bullet Display: large and easy-to-read LCD screen.
bullet Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
bullet Also available in "x10" mode: reads in increments only of 10ppm (0-9990ppm).

Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver.

Perfect for both consumer or commercial use.

Carry one in your pocket or toolbox at all times!

CE

  SPECIFICATIONS
bullet Range: 0 - 9990ppm (mg/L)
bullet Accuracy: +/- 2%
bullet Power source: 2 x 1.5V button cell batteries (included)
bullet Battery life: over 1,000 hours of continuous use
bullet Dimensions: 15.5 x 3.1 x 2.3cm (6.1 x 1.25 x 1 inches)
bullet Weight with case: 76.5g (2.7 oz)
bullet Weight without case: 56.7g (2 oz)
TDS Meter Warranty

 

IN-LINE DUAL TDS METER  
Dual TDS Meter   FEATURES
bullet Displays TDS levels of the feed water and product water with in & out electrode probes.
bullet Highly efficient and accurate due to its advanced microprocessor technology.
bullet Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
bullet Dual Range 0-9,990 ppm (From 0 - 999ppm the resolution is 1ppm. From 1,000 to 9,990ppm, the resolution is 10ppm, indicated by a blinking 'x10' image.)
bullet Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
bullet Comes equipped with John Guest Quick-Connect T-fittings as shown.
bullet Installs quickly and easily.

Measure the tap water coming in vs. the purified water going out of your system at any time.

Use the meter to determine when the filters need to be changed.

Install the meter for your customers so they'll always know how their system is performing.

water filter test unit

  SPECIFICATIONS
bullet Range: 0 - 9990ppm
bullet Accuracy: ±2%
bullet Cable Length: 24.5" (including sensor)
bullet Power source: 2 x 1.5V button cell batteries (included)
bullet Battery life: over 1,000 hours of continuous use
bullet Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
bullet Weight: 79.4 g (2.8 oz.)
TDS Meter Warrany  

 
 

Send mail to peter@psifilters.com.au with questions or comments about this web site.

reverse osmosis | water filters | water filter | water purifier