Boss F02 Fluoride twin system
- Fluoride Reduction
- Lead & Heavy Metals
- USA Housings
- 5 Yr Warranty
Stay healthy and enjoy the luxury of great-tasting water with the Boss F02 Fluoride twin system. It features a special fluoride removal filter system to reduce levels of fluoride, chlorine, and other impurities. The two-stage filtration system ensures crystal-clear drinking water for you and your family. Trust the Boss F02 Fluoride twin system to deliver clean, safe drinking water.
Boss F02 twin Undersink system offers fluoride treatment but also Chlorine, pesticides, herbicides, heavy metals such as lead and arsenic.
Contains Boss fluoride cartridge and Omnipure OMB-934-1MPB carbon cartridge.
We imported some fluoride activated alumina type that we had heard about from the United states and were surprised with the results obtained is laboratory testing with a NATA certified testing lab.
This system is not being protected with a dedicated sediment filter so if you are in an area with higher sediment or colloidal material (Victoria in particular) then you should consider the BOSS F03 model.
Supplied with QMP-300-HP U.S.A. made housing 10" Australian Standards AS3497 with 1/4" NPT threaded ports. This housing is tough with a burst strength of 575psi (4000kpa) and is tested to AS3497 which means it has been tested from 0 to 700kpa and back to 0 kpa 100,000 times without failure, cracking or distortion.
With these premium systems we supply the 550kpa pressure limiting valve with dual check valves which is a plumbing code requirement, the valve is also Watermark AS1357-2 licence no 02596 as the watermark is also a plumbing code requirement.
We supply the 550kpa PLV with the premium system so the filter system runs faster than other units on the market.
Filter system dimensions:
36cm high, 26cm wide and 14cm deep
What is in the box?
1 x twin wall mounting bracket, powder coated steel with required screws, stainless steel optional.
3 metres of Genuine John Guest tubing NSF certified food grade, 230 psi pressure rated.
2 x 1/4" tube to 1/4" NPT speed fit fittings in and out of the system.
1 x "C" model faucet, others are optional at this link,click here
3 x John Guest locking clips
1 x roll plumbers thread tape
1 x housing spanner to undo housings when required
1 x Omnipure OMB934-1Mpb
1 x Boss Fluoride alumina cartridge
1 x Instruction manual
1 x mains fitting instructions
Comes pre-assembled
Product comes complete, ready for installation.
DROP DOWN MENU OPTIONS-
Click here to view faucet options
Click here to view mains connection systems
With most of these types of fluoride cartridges the specification sheets are quite vague stating up to 90% treatment and usually those types of results are not obtainable in the real world. We also could have put up to 93% but we don’t work that way.
The results are as follows in real world testing in Australia.
The fluoride present in the test water was 720 PPB (parts per billion which is .72 parts per million).
|
Test No after 50 litre flush |
Flow rate tested litres per minute |
Result % fluoride removed |
|
1 |
1 |
85 |
|
2 |
1.5 |
93 |
|
3 |
2 |
85 |
|
4 |
2.5 |
85 |
|
5 |
3 |
83 |
|
6 |
3.5 |
82 |
|
7 |
4 |
81 |
|
Test no after 2000 litre flush |
Flow rate tested litres per minute |
Result % fluoride removed |
|
1 |
1 |
93 |
|
2 |
1.5 |
82 |
|
3 |
2 |
75 |
|
4 |
2.5 |
69 |
|
5 |
3 |
63 |
|
6 |
4 |
57 |
From the above tables, you can see that after a fair bit of usage the flow rate if kept to a slower level will maintain an acceptable removal rate. Most water filter systems flow at around 2.5 litres per minute.
The most successful way to treat fluoride and other contaminates is with reverse osmosis.
