Specifications
Omnipure-OMB934 1M Lead Reduction
Micron Rating >99% @ 1 _m
Filter Dimensions 2.50@ O.D. x 1.25@ I.D. x 9.80@ L
Chlorine Reduction >95% 6,500 gallons @ 0.75 GPM
Lead Reduction >90% 2,500 gallons @ 0.75 GPM
Cyst, Cryptosporidium,
Giardia Reduction >99.95%
>99.99%
Initial _P <5.0 psid @ 0.75 GPM
Carbon Weight 0.80 lbs.
Carbon Type Activated Coconut Shell Carbon
Notes: Chlorine and lead reduction capacities are based on laboratory testing conducted using test protocol contained in NSF Standards 42 and 53 respectively.
Warnings
Operating Temperature 40 - 125_ F
Maximum Operating Pressure 250 psig
Maximum Differential Pressure 100 psid
Collapse Pressure 200 psid
_ Omnipure OMB934 1M Lead Reduction filter elements have been designed to fit most standard household and
commercial housings. Your Omnipure representative can verify filter housing compatibility.
_ Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
or after the system. Activated carbon block filters are not designed to remove bacteria or viruses.
_ Actual performance results may vary based on the level of organic contaminants in the influent water, changes in
pH and upon other conditions that may be encountered during actual use.
General Installation/Operation/Maintenance Requirements
_ Flush new cartridge for 10 minutes prior to use.
_ Replace cartridge when rated capacity is reached, or when flow becomes too slow.
_ Install in compliance with state and local laws and regulations.
Pack includes 1 x 1 micron polyspun sediment filter & 1 x Omnipure OMB934-1mPB