6-Stage Extreme Low Waste Reverse Osmosis System – Premium Water Filtration

After extensive testing, we proudly offer the most advanced Reverse Osmosis system on the market. Designed in response to customer concerns about water wastage, this cutting-edge system delivers superior filtration with exceptional efficiency and performance.

Why Choose This System?

• Extreme Low Waste Ratio – Approximately 0.6 litres of waste water for every 1 litre produced.
• Aquatec Permeate Pump – Improves membrane performance, reduces TDS creep, increases tank pressure and efficiency, especially in low-pressure areas.
• Twin Pressure Gauges – Easily monitor cartridge condition and system pressure.
• Chloramine Removal Cartridge – Handles 3,800 litres of chloramine and 45,000 litres of chlorine.
• Handheld TDS Meter – Monitor membrane effectiveness and water quality.
• Membrane Flushing Valve – Simplifies maintenance and extends membrane life.
• Remineraliser Cartridge – Corrects pH and adds essential minerals for improved taste and health benefits.
• High Output – Produces 200L/day at 40 psi and over 500L/day at 90 psi.
• 3-Year Pro-Rata Membrane Warranty – Because the low waste ratio is harder on the membrane, we back it with an extended warranty.

6-Stage Filtration Process

• Stage 1: 5 Micron Polyspun Sediment Filter
• Stage 2: 1 Micron Sediment Filter
• Stage 3: Matrikx CTO Chloramine Removal Cartridge
• Stage 4: Dow Filmtec BW30-1812-75 TFC Membrane (U.S. made)
• Stage 5: Omnipure K2548 Remineraliser Cartridge
• Stage 6: Omnipure CL10RO-T40 Coconut Carbon Post-Filter

Important Notes

• TDS Limit: Suitable for water with less than 500ppm total dissolved solids. Ideal for metropolitan areas including Adelaide, Perth, Brisbane, Sydney, and Melbourne. Not suitable for bore water.
• Minimum Pressure Required: 40 psi (280 kPa). Optimal performance at 50 psi (350 kPa) or higher.
• Sound Note: The permeate pump makes a clicking sound approximately every 3 seconds while filling the tank (similar in volume to clicking a biro), and this reduces over time.

System Specifications

• Filter Unit Dimensions: 49 cm wide × 42 cm high × 14 cm deep
• Tank Options:
  • 4.2L – 33 cm high × 20.5 cm diameter
  • 9L – 39 cm high × 24 cm diameter
  • 12L – 39 cm high × 27.5 cm diameter
• Optional Faucets: Available – Click here to view options.

Premium Build & Compliance

• QMP-300-HP Housing (USA Made) – 10” NSF certified housing with 575 psi (4000 kPa) burst strength, tested to AS3497 standards.
• Includes 550 kPa Pressure Limiting Valve – With dual check valves, WaterMark AS1357-2 license no. 23133. Meets plumbing code requirements.
• Product Supplied Complete – Ready for installation out of the box.

Cartridge Replacement Information

• Annual Change: 2 x Polyspun, 1 x Matrikx CTO, and 1 x CL10RO-T40. Click here for full set
• Re-mineraliser: Requires changing approximately every 2 years. Click here for full second year set including remineraliser
• Membrane: Replace every 4 years. Click here for membrane

Additional Information

• Tank Details: Click here for tank details.
• Substance Treatment Rates (PDF): Click here to view full list.

Warranty

This system includes a 5-year warranty on components and a 3-year pro-rata warranty on the membrane. Built with high-quality parts and designed to outperform others, it provides long-term reliability, safety, and peace of mind.