PSI-021-5RM-HA 5 Stage Re-Mineralizing, Oxygen rich Hi alkalising
- USA Made Cartridges
- USA Made Housings
- pH 8.5 +
- 5 Yr Warranty
PSI-021-5RM-HA 5-Stage Re-Mineralising Reverse Osmosis System
Experience ultra-pure, oxygen-rich, high-alkaline water straight from your tap. The PSI-021-5RM-HA combines premium RO purification, a refillable Hi Alkaliser to lift pH to ~8.5–9.5, and balanced minerals for clean, great-tasting water — all with a low ~1:1 waste ratio.
Why Choose This System?
- 5-stage filtration — comprehensive purification with taste-polish and mineral restore.
- Hi Alkaliser re-mineraliser — raises pH (~8.5–9.5), adds Ca/Mg/K, and oxygen-enriches output.
- Low waste ratio (~1:1) — efficient water usage with flush technology.
- High output — DOW FilmTec ~300 L/day @ 50 psi; can reach ~450 L/day at higher pressure.
- Compact under-sink install — dedicated lead-free faucet included.
- Pressure limiting valve — included for system protection.
- NSF-certified components — compliant with Australian Standards.
How It Works: 5-Stage Filtration
- Stage 1 — Sediment pre-filter removes dirt, sand & particulates.
- Stage 2 — Carbon block reduces chlorine, chemicals & odours (≈37,000 L).
- Stage 3 — DOW FilmTec RO membrane removes ~96–98% fluoride, heavy metals, nitrates & dissolved salts.
- Stage 4 — Post-carbon polish enhances taste and reduces residual organics.
- Stage 5 — Hi Alkaliser re-mineraliser raises pH, adds minerals, oxygen-enriches for fresh mouthfeel.
PFAS Reduction & Water Quality
Carbon → membrane → carbon is a proven sequence for broad contaminant reduction, including PFAS (e.g., PFOA). Typical Australian town water is ~pH 7–7.5. After the membrane, minerals are very low and pH can drop to ~pH 6; the Hi Alkaliser lifts pH back above 7 for balanced taste.
System Specifications
- Membrane capacity — ~300 L/day @ 50 psi (350 kPa); up to ~450 L/day at higher pressure.
- Waste ratio — ~1:1 (conditions & water temp dependent).
- pH output — typically 8.5–9.5 with Hi Alkaliser (source-dependent).
- Operating pressure — minimum 40 psi (280 kPa); optimal ~50 psi (350 kPa).
- Main unit size — ~42 cm (H) × 35 cm (W) × 14 cm (D).
- Pressure limiting valve — included; WaterMark compliant.
- Components — NSF-certified, built to Australian Standards.
Connection Types
- ½″ Flick-Mixer Braided Line — most common in modern kitchens. Fit the supplied adapter with the rubber washer, then re-attach the braided hose. Details/Instructions
- ¾″ Dishwasher Adapter — use the dishwasher cold-water outlet where no dishwasher is installed. Details/Instructions
- ½″ Tee Olive Fitting (Copper) — common in older homes with separate taps & copper lines. Details/Instructions
Storage Tank Options
- Standard — 9 L stainless steel tank (NSF certified).
-
Alternative sizes:
- 4.2 L — 33 cm (H) × 20.5 cm ⌀
- 9 L — 39 cm (H) × 24 cm ⌀
- 12 L — 39 cm (H) × 27.5 cm ⌀
- TANK DATA SHEET
Faucet Options
Bundle & save: upgrading your faucet with the system is cheaper than buying it later.
Browse Faucet Range, then select your choice from the Faucet Option dropdown above. Fits most sink/benchtop holes (12–13 mm) and standard thicknesses.
Replacement Cartridges & Maintenance
- Annual cartridge pack (ROCDU-02) — order here.
- RO membrane (~4 years) — order here.
- Re-mineraliser / alkaliser (~2 years) — order here.
- Membrane care: flush the membrane for ~15 minutes every 2–3 months; replace about every 4 years for best performance.
Performance Data
The system demonstrates high contaminant removal rates across both inorganic and organic compounds:
Inorganic
- Aluminum 99%
- Arsenic 98%
- Alum 95%
- Cadmium 95%
- Calcium 98%
- Chromium III 98%
- Copper 90%
- Fluoride 98%
- Iron 98%
- Lead 90%
- Magnesium 98%
- Manganese 90%
- Mercury II 85%
- Nitrate 90%
- Potassium 95%
- Selenium 95%
- Silver 98%
- Sodium 95%
- Strontium 90%
- Sulfate 90%
- Zinc 98%
- Total Dissolved Solids 95%
- Asbestos 99%
Organic
- Chlorine 98%+
- Herbicides 98%+
- Pesticides 98%+
- DDT 98%+
- Endrin 90%+
- Lindane 98%+
- Aldrin 98%+
- Benzene 98%+
- VOCs 98%+
- Atrazine 98%+
- Fluoranthene 98%+
- Phenol 98%+
- Trihalomethanes 98%+
- Toxaphene 98%+
- Dichloromethane 98%+
- Chloroform 98%+
- Trichloroethylene 98%+
- Perchloroethylene 98%+
- Tannic Acid 98%+
- Methoxychlor 98%+
- PCB 98%+
Performance Data Sheets
- Membrane — DATA SHEET
- Sediment — DATA SHEET
- Pre Carbon (Omnipure) — DATA SHEET
- Post Carbon (Omnipure) — DATA SHEET
- Remineraliser (Calcite) — DATA SHEET
Additional Information
Cartridge replacement tutorial
Helpful Resources
- Reverse osmosis storage tanks — details
- Waste ratios explained — learn more
- Mains connection install guide — how each adapter is installed
- Warranty (5 years) — see terms
- Selection advice — which system suits me?
Warranty
The PSI-021-5RM-HA comes with a 5-year warranty covering defects in materials and workmanship under normal use. Built with top-grade components for durability and reliable performance — see full warranty terms for details.